Orku 8L Electric Towel Warmer Cabinet with UV Sterilisation, White

The Orku 8L Electric Towel Warmer Cabinet uses UV sterilisation to clean and disinfect towels and clothing, keeping them fresh and ready for use. It holds approximately 4-6 small towels and suits beauty salons, hotel spas and general home use.

Key Features

• UV sterilising action cleans and disinfects towels and articles of clothing, including underwear, socks and personal items
• Sturdy stainless steel liner helps prevent rust
• Detachable internal rack
• Compact unit for personal use
• Easy to operate
• Removable water tray for easy cleaning

Specifications

• Colour: White
• Material: Stainless steel
• Disinfecting method: UV sterilising
• Weight: 3.5kg
• Capacity: 8 litres
• Towel capacity: 4-6 small towels
• Voltage: 220V (Australian compatible)
• Frequency: 50Hz
• Power: 130W
• Heating cycle: the machine heats until it reaches 60 +/- 10 degrees Celsius (around 15 minutes), then stops heating until the temperature falls back to 50 +/- 10 degrees Celsius (around 15 minutes), then heats again until it returns to 60 +/- 10 degrees Celsius (around 20 minutes)
• Dimensions (cm): 28.5 (h) x 31.5 (w) x 27 (l)
• RCM and CE certified

What's in the Box

• 1 x 8A Towel Warmer
• 1 x User's Manual

Operating Notes

• Due to the UV light sanitising action combined with wet towels or tools, some unpleasant odour might occur during the sanitising process.
• Switch the machine on for a maximum operating time of up to 8 hours per day.
• Leave towels in an operating machine for a maximum of 2 hours.
• Always make sure towels are in the warmer while it is switched on; operating with no towels present will cause damage to the unit.
• Leaving towels in an operating machine for extended periods may cause discolouration and stiffness of the towel.
• Not adhering to all operating instructions may cause damage to the machine and void the warranty.

Ongoing Care Instructions

• Before first use, clean the towel warmer with a slightly wet towel (new towel warmers come with iron powder on the seals and inside the machine for protection).
• Daily: clean and wipe the machine at the end of each day after use.
• If these instructions are not followed, buildup may occur over time inside the machine and may cause rusting to start in the future or other buildup. Should that happen, the manufacturer will not be liable.
• If you see a rusty mark, use a soft or mild rust cleaner or other natural options to remove rust by wiping gently.
• Must be kept in a well ventilated area.