The VEVOR 40L (10 gallon) portable sandblaster delivers fast, high-density surface treatment for large areas, making light work of rust, stain and paint removal on iron frames, statues, car panels and marble engravings. With a water oil separator, pressure gauge and four ceramic nozzles, it keeps abrasive flowing smoothly for consistent results.
Key Features
- Efficient surface treatment with high sandblasting density for quick removal of rust and stain on iron frames, statues, car paint and marble engravings
- Water oil separator with pressure gauge removes moisture from compressed air to help prevent wet media clogging the valve
- Two 6-inch rubber wheels make the unit easy to move around outdoor rust removal work
- 8-foot hose provides access to hard-to-reach places such as outdoor iron frames, statues and other immovable objects
- Four ceramic nozzles offer superior wear, corrosion and heat resistance compared with metal nozzles, with no worries about abrasive impact, wear, static buildup or sparking
- Gas-water separator keeps the sandblasting tank dry, while the pressure gauge displays real-time working pressure for easy monitoring during operation
Specifications
- Brand: VEVOR
- Tank capacity: 10 gallons / 40L
- Recommended abrasive capacity: 4.9 gallons
- Working pressure: 60-110 PSI
- Air consumption: 6-25 CFM
- Recommended abrasive: 60-100 grit, such as silica sand, aloxite and glass beads
- Nozzles: 2.0 mm, 2.5 mm, 3.0 mm and 3.5 mm (3.5 mm pre-installed), ceramic
- Wheels: two 6-inch rubber wheels
- Hose length: 8 feet
- Air compressor requirement: 5.5KW compressor required separately
What's in the Box
- 1 x 40L sandblaster tank
- 4 x ceramic nozzles (2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm pre-installed)
- Water oil separator with pressure gauge
- 8-foot hose
- 2 x 6-inch rubber wheels
Please note: the abrasive used must be dry, or it will cause clogging. An air compressor is not included and must be prepared separately.